Detail information of wood veneer for hotel restaurant furniture table chairs.

1.Grade A wood veneer should be in thickness 0.45mm, and should according to the panel size to cut the suitable size, the wood veneer length should be 2.6 meter around. The width should be 20cm size quantity should be occupied 80%, and 15cm quantity should not be over 20%.

2.For the mountain wood grain type, the grain should be in the middle, and without the disadvantage of white edge, without knot, without hole, without resin, without crash. The wood grain should be clear, the surface plain, and without color different, natural wood color difference is acceptable, but should be all the same. The straight type wood veneer, the grain distance should be average.

3.The wood veneer width tolerance allow within +10mm-20mm , the thickness tolerance is +0.1mm, the wood veneer water rate is less than 14%.

4.Normally, grade A wood veneer are using for the surface of hotel furniture restaurant table chairs, wood panel, headboard and some other place of the product where are in visible. Grade B wood veneer are always using for the back of the product, or in the place where can not be seen.

Just don't hesitate, write e-mail to us or leave message on our website www.hshotelfurniture.com , we will reply you within 24 hours.

Hot Tags: restaurant furniture, hotel, China, manufacturers, suppliers, factory, wholesale, customized